Paramount 3D ABS — ABSFilament Review & Print Settings
US-made ABS with reliable extrusion. Engineering-grade thermoplastic.
Quick Specs
Colors Available
Print Settings Guide for Paramount 3D ABS
ABS demands controlled conditions. An enclosure is mandatory — ambient drafts cause delamination and warping on any print over 3cm tall. Set nozzle to 230-250°C and bed to 100°C with PEI or a ABS-slurry (ABS dissolved in acetone) applied to glass. Fan cooling at 0% for the entire print — airflow is the enemy of ABS adhesion. Print speed of 45 mm/s is standard. Enclosure target temperature: 40–50°C ambient. ABS fumes contain styrene — always vent to outdoors or use a HEPA+carbon filter. Warping is the primary failure mode; thick brims (8–15mm) and a hot enclosure solve 90% of issues.
Why Choose Paramount 3D ABS
Paramount 3D ABS is the traditional engineering choice for high-temperature applications. Paramount 3D formulates ABS for consistent melt behavior that reduces nozzle clogging and layer delamination, the two most common ABS failure modes. Heat deflection at 100°C+ makes ABS the choice for automotive interior parts, under-hood housings, and components near heat sources. Acetone smoothing gives ABS parts a professional injection-molded finish — no other common FDM material offers this post-processing option. For enclosures, brackets, and parts that live in hot environments, ABS remains the cost-effective standard.
What to Print with Paramount 3D ABS
Paramount 3D ABS targets functional, high-heat parts: automotive trim pieces, electrical junction boxes, RC car bodies, drone frames, and any housing that faces heat above 60°C. Acetone vapor smoothing makes ABS excellent for presentation models requiring a glossy, injection-molded appearance. Tool handles, machine guards, and structural brackets benefit from ABS's impact resistance relative to PLA. Professional shops use ABS for jigs, fixtures, and manufacturing aids because of its machinability — it drills, taps, and sands cleanly with standard metalworking tools.
Common Issues & Fixes
Warping: the #1 ABS problem. Enclosure required, no fan, ABS slurry or PEI bed, thick brim, 110°C bed. Layer splitting / delamination: raise nozzle temp 5–10°C, slow down, check enclosure temp. Cracking sounds while printing: enclosure too cold — preheat for 10+ minutes. Fumes: always ventilate, ABS styrene fumes are harmful. Stringing: less common than PETG but increase retraction 0.5–1mm if present. Poor surface finish: sand with 220-grit then vapor smooth with acetone.
Notes
Enclosed printer required. Good layer adhesion.
Where to Buy Paramount 3D ABS
Find Paramount 3D ABS from Amazon and authorized resellers. Price comparison helps — filament costs vary by vendor, fulfillment location, and quantity. Check manufacturer storefronts for direct pricing and bundle deals.
PrintLog3D participates in the Amazon Associates program. Purchases through our links may earn a small commission at no extra cost to you.
Log your ABS prints in PrintLog3D
Track your actual settings for Paramount 3D ABS — nozzle temp, bed adhesion, slicer profile, and results. Build a settings history that tells you exactly what works.